Making a 3D style of face mask

Hi everyone,

Recently, my nephew asked me to make him some solid color face masks that he can use at college. He wanted washable ones so that he doesn’t have to keep buying disposable ones and to create less waste.

I decided to try the “3D” style of mask, which is slightly boxed to allow for easier breathing because the fabric sits just a little farther out from the nose and mouth.

I followed a pattern and YouTube video by Add Crafts. She has a downloadable pattern in a link in the comments. The video does not offer text instruction, only visual instruction so you may need to pause it a few times to see how she assembles the mask

I used the size large pattern for my test mask. It did sew together fairly quickly. However, I think this pattern runs small. The size large is ok for me, but I asked my teen son to try it and he said it is too small. There is an XL size that I will try next.

Here’s a look at the mask with the pattern:

3D Face Mask, size large, pattern by Add Crafts

The top of the pattern has a curved indentation to fit the nose area better, and you can insert a wire.

Here’s a look at the 3D mask outside and inside:

For me,  I prefer the feel of the rounded style of face mask using the Craft Passion pattern. It’s definitely all about personal preference! I’m going to make my nephew one of each style, and ask him which style he prefers to wear.

Happy quilting!

-Jen

Dachshund Themed Face Mask Using the St. Charles Pattern and Jig

Hi everyone,

I tested out another face mask pattern that has a pocket for an optional filter and a pocket for an optional nose wire published by St. Charles Hospital here in Oregon.

I wanted to test this mask because of the optional filter pocket and because I liked the finished look of it with either elastic or fabric ties.

I decided to use a cute dachshund print from my stash mostly because my sister loves these little dogs. She is a nurse practitioner so I’m making masks for her and other providers at her location.

I also used a cardboard jig from an Eggo box and Halloween-themed duct tape, which I had on hand, to speed up the pleat making process. By using a jig, you get consistent pleats without needing to pin them or iron them.The jig instructions are courtesy of a quilter (bendphoto) in Bend, Oregon, and she has the measurements on her YouTube video so go check it out!

Here’s a look at my mask and cardboard jig:

Dachshund Themed Face Mask and Cardboard Jig

Here’s a look at the filter insert on the bottom of the mask. The wearer can insert a disposable or washable filter of their choosing or not.

Optional Filter Opening

Here’s a look at where the optional inserted wire can create a bend to conform to your nose. There is a little channel at the top, and I just used a pipe cleaner.

Optional Wire Pocket

The finished mask:

Two pleated finished mask, pattern from St. Charles

I’m going to make some more of these masks, both with elastic and fabric ties. I prefer the elastic because it fits my face better, and I have a little bit left. Fabric ties take much longer to make, but many people do prefer them.

Happy quilting!

~Jen

Add a Pipe Cleaner to Homemade Face Masks for COVID-19

Hi everyone,

I have made about 30 masks so far for my sister, a nurse practitioner, and her colleagues.

She asked if I could modify the mask to add a pipe cleaner along the top. Pipe cleaners are easy to bend into shape so that you can adjust the mask for a better fit.

I adjusted the Deaconess face mask pattern to allow for a pipe cleaner casing. I also slightly enlarged the pattern. This larger face mask will still fit smaller faces. If you are using elastic, just add a large safety pin to attach the elastic straps to each other around the back of the head. I’m running out of elastic so I made fabric ties instead, which allow you to adapt the mask to fit different sizes of faces easily.

I made a Star Trek themed face mask for my husband with the pipe cleaner casing  and fabric ties. It fits over his larger face with a full beard and mustache nicely.

Star Trek themed homemade mask with pipe cleaner

I put the Star Trek mask on my Tula Pink cat, pattern by Funky Friends Factory.

You can sort of see the shaping along the nose, provided by the pipe cleaner.

Star Trek themed homemade mask on Tula Pink cat!

If you’d like to make this homemade face mask modification, I put my instructions into a free Word document, Adding a Pipe Cleaner to a Homemade Face Mask. 

These instructions are free to use. Let me know if you found them helpful!

Stay safe!

~Jen